Pet drinking fountains not only provide a continuous source of clean water, but also ensure the health of pets. So, how to properly use and maintain your smart pet drinking fountain to make it work best? Here are some practical guidelines and tips to help you better understand the use and maintenance of the product.
1. Guide to use
Cleaning before first use: Before the first use, rinse each part with warm water and mild detergent, especially the sink and filter.
① Water quality selection: Try to use filtered water or distilled water, which can reduce mineral deposition in the water, extend the life of the equipment, and provide a safer drinking environment for pets.
② Regular water change and cleaning: Even for smart drinking fountains, regular water change and cleaning are the key to keeping the water fresh. It is recommended to change the water at least every 2-3 days to prevent bacteria from growing.
③ Regular filter replacement: Smart drinking fountains are equipped with a filtration system, but the filter needs to be replaced regularly. It is usually recommended to replace the filter once a month. Please refer to the product manual for the specific frequency.
④ Maintain proper water level: Ensure that the water level in the sink is always within the proper range to avoid equipment failure due to water shortage.
2. Maintenance Tips
① Clean the filter regularly: Although the filter needs to be replaced regularly, it should be rinsed with clean water once a week during use to remove impurities attached to the surface and ensure its filtering effect.
② Check the water pump: The water pump of the water dispenser is a key component. Check the water pump regularly for blockage. If you find that the water output is reduced or there is an abnormal sound, you may need to clean the water inlet of the water pump.
③ Avoid long-term idling: Long-term idling of the water pump will damage the equipment. Make sure there is enough water in the water dispenser. Some smart water dispensers have a water level monitoring function to avoid this situation.
④ Use special cleaning tools: Some smart water dispensers are equipped with special tools such as cleaning brushes. Using these tools can more effectively clean the hard-to-reach parts of the equipment, especially the inside of the water pump.
⑤ Storage location: The water dispenser should be placed away from direct sunlight and dusty places to prevent water deterioration and premature aging of the equipment.
3. Common problems and solutions
① Increased noise from the water pump: When the noise from the water pump becomes louder, it is usually because there are impurities inside the water pump or the water level is too low. First check the water level, and if there is no abnormality, clean the water pump.
② Reduced water flow: Reduced water flow may be caused by a clogged filter or the water pump needs to be cleaned. Cleaning or replacing the filter and regularly maintaining the water pump can avoid such problems.
Through proper use and regular maintenance, the smart pet water fountain can not only provide pets with continuous healthy water, but also extend the service life of the equipment. Pay attention to these details, and your pet will have a healthier and more comfortable drinking environment!
No comment